The AILE  BC-CH is a dry reconnectable breakaway for the conventional dispensing market. It is designed to be installed on fuel dispensing hoses, and will separate when subjected to a designated pull force. The dual valves seat automatically stopping the flow of fuel and limiting any fuel spillage, while protecting the dispensing equipment. When reconnecting the separated halves, the AILE  BC-CH  seals tightly on an O-ring before the poppet stems engage to open the valve. For proper operation on high-hanging hoses, the AILE  BC-CH  must always be installed with a “straightening”hose with a minimum length of 9". For low hose applications, the AILE  BC-CH should be installed down stream of the retractor cable.

Materials:

  Body: die cast zinc

Main Seals: Viton

Main Spring: stainless steel

  Guide and poppet: POM

  Protective Sleeve: PA66

AILE BC-CH 3/4”

Gross Weight: 18.5kg/case of 32

31x30x26cm3 / case of 50

Ordering Specifications:                               

Product#                             Size                     

BC-CH3/4"                         BSP3/4" / NPT3/4"     

Features and Benefits:

Pull force- the AILE   BC-CH3/4" will break away

with a pull force of  250 lbs ±5%, the

AILE   BC-CH1" will break away with a pull force of

300 lbs±5%.

Unique double-poppet design-features low

pressure drop.

Flow rate: 0-60L/Min

Working pressure: 0.18Mpa

Coupling halves- protected by proven plastic

sleeves.

Easily reconnected- just "push and twist" until

you hear the audible click, signifying the unit has

been correctly reconnected. Reconnection force

approximately 15 lbs.

Line shock - the AILE  BC-CH  is able to absorb

the effects of normal line shock through the unique

design of the disconnecting features.

May be reconnected under wet or dry hose

 conditions.

100% Factory Tested.

BC-YC Series Breakaways

The AILE BE-YC is designed to be installed on fuel dispensing hoses, and  will separate when subjected to a designed pull force. The dual valves seat automatically. Stopping the flow of fuel and limiting any fuel spillage, while protecting the dispensing equipment. For proper operation, the AILE BC-YC 3/4” should be installede with a straightening hose with a minimum length of 9”. The AILE BC-YC 1” should be installed  with a minimum  length of 12” .

Materials:

Body: Aluminum

Main Seals: Viton

Guide and poppet: POM

Protective Sleeve: PVC

AILE BC-YC 3/4”

Net Weight: 23kg/case of 100

Gross Weight: 26kg/case of 100

26.8x48x26cm3 /case of  100

AILE  BC-YC 1"

Net Weight: 19kg/case of 50

Gross Weight: 22kg/case of 50

29x29x30cm3 /  case of 50 

Ordering Specifications:                              

Product#              Size              Weight       

BC-YC   801        NPT3/4"×NPT3/4"   230g

BC-YC   802         BSP3/4"×BSP3/4"  230g

BC-YC   803        NPT1"×NPT1"      380g

BC-YC   804         BSP1"×BSP1"        380g

Features and Benefits:

 Pull force- the AILE  BC-YC 3/4" will break away with

a pull force 250 Ibs ±5%, the AILE  BC-YC 1"  will break

 away with a pull force 300 Ibs ±5%.

Certainty of operation- designed to be replaced

after separation, instead of reassembled, to protect

against reassembly errors.

Unique double-poppet design- features low

pressure drop.

Flow rate:  0-60L/Min (3/4")                    

                      0-120L/Min (1") 

Working  pressure: 0.18Mpa

Low pressure drop- the integral check valve design

 allows for minimal pressure drop for faster, high-volume

fill-ups.

100% Factory Tested.